Paver Installation · Southwest Florida

Pavers priced by the square foot, built on a base that stays flat.

Driveways, walkways, patios and pool surrounds for Cape Coral and Fort Myers homes at $8 per square foot installed. Measured on site, quoted in writing, and built on a compacted base so the surface stays level in sandy soil.

$8/SF installedDriveways, walks, patios, pool decksCompacted base, sand set, edge restrained
Multi-tone paver driveway at a coastal Cape Coral home
What's included

The full scope, in writing.

  • Paver driveways, walkways, patios and pool decks
  • Excavation and compacted base suited to Southwest Florida fill
  • Sand-set pavers with edge restraint and joint sand
  • Pattern and color selection from stocked lines
  • Existing concrete or turf removal quoted as a separate line
  • Cleanup and haul-off on completion
Why homeowners choose BCQ

Paver bids are hard to compare because every contractor prices a different base. BCQ quotes a flat published rate per square foot for a compacted base, sand-set pavers and edge restraint, and shows removal of the existing surface as its own line. You see what you are paying for, and the number does not drift once the crew starts.

How the job runs

Paver Installation, the way we actually deliver it.

Pavers in Cape Coral live or die on the base. Sandy fill compacts unevenly and summer rain finds every soft spot, so a driveway laid on a thin base ruts under the first vehicle. BCQ excavates to depth, compacts in lifts, and sets pavers on screeded sand with edge restraint holding the perimeter, which is what keeps a surface flat through the wet season.

The published rate covers the standard scope: base, sand set, pavers, edge restraint and joint sand. Removing an existing concrete slab or old pavers is a separate line because it depends on what is there. Complex patterns, borders and inlays are quoted when you pick them, before anything is ordered.

For pool decks and patios we plan drainage so water runs away from the house and the cage, and we work around screen enclosures and equipment pads. For driveways we check the apron and swale so the new surface meets the street cleanly.

Every job is measured on site and quoted in writing. If the plan changes after the quote, the change is priced before work continues, the same way we run commercial installs.

What's included & how it's priced

Published residential rate. Area measured on site; removal of the existing surface shown separately.

Scope itemCadence / rateNotes
Pavers, installed$8/SFCompacted base, sand set, edge restraint, joint sand.
Existing surface removalQuoted on the proposalConcrete, old pavers or turf, priced by what is actually there.
Pattern, border & color selectionIncluded from stocked linesComplex patterns or inlays priced before ordering.
Drainage & grade planningIncludedWater directed away from the house, cage and doors.
Cleanup & haul-offIncludedSpoils and packaging removed on completion.

What you receive in writing

  • Measured square footage and the paver line selected
  • Removal shown as its own line if there is an existing surface
  • Base and edge restraint stated on the quote
  • Scheduled start and expected duration
  • Completion photos and care notes for joint sand and sealing

Straightforward pricing.

Residential pavers run at a flat published rate per square foot for the standard scope. Removal of what is there now is quoted separately, and any pattern upgrade is priced before it is ordered.

Pavers, installed
$8/SF
Existing surface removal
Quoted on the proposal
Pattern upgrades & borders
Priced before ordering

Square footage is measured on site and stated on the quote. Sealing is optional and quoted on request.

Our work

Recent BCQ work around Cape Coral and Fort Myers.

See the full gallery
FAQ

What homeowners ask us.

Straight answers, the same ones we give at the kitchen table. Anything else, call us at (239) 799-5594.

How much do pavers cost in Cape Coral?

BCQ installs residential pavers at $8 per square foot for the standard scope: compacted base, sand-set pavers, edge restraint and joint sand. Removing an existing slab or old pavers is quoted as a separate line.

Can you put pavers over my existing concrete driveway?

Sometimes, if the slab is sound and the finished height works with the garage and the street. Often it is better to remove the slab so the base can be built properly. We look at it on the site visit and quote both ways when it is a real choice.

What keeps pavers from sinking in sandy soil?

The base. We excavate to depth, compact in lifts and hold the perimeter with edge restraint, so the surface stays flat when summer rain saturates the fill. A thin base is why most failed driveways failed.

Do you seal pavers?

Sealing is optional and quoted on request. New pavers should settle through a few rain cycles before sealing, and we leave care notes on joint sand and cleaning with the completion photos.

Get started

Get a free property assessment.

Tell us about your property and we'll schedule a walkthrough and a clear, itemized quote — usually within one business day. Have an RFP or current scope? Send it and we'll bid it line for line.

Call(239) 799-5594Emailcontact@bcqlandscaping.com
HoursMon–Sat · 7:00 AM – 6:00 PM

Licensed & insured · Blue Collar Q LLC

Prefer to talk? Call or text (239) 799-5594 or email contact@bcqlandscaping.com.

Step 1 of 2 — property details next. Takes under a minute.

No spam. No obligation. By submitting, you agree to our Privacy Policy. We typically respond within one business day.